F-01
Gasketprototypes
Flat gaskets and seals cut accurately from your drawing, with bolt holes and profiles where they should be.
Service 06 · Soft Plastic Prototyping
Flexibleparts.
Notooling.
Precision cutting and prototyping for gaskets, flexible components and protective inserts.
Fig. 06 · Gasket, cut from file
— Cut - - Seal line / centre lineNo die, no tooling
01 · The service
Softparts,madetotest
Prototyping and short-run production of gaskets, industrial components, protective inserts and functional samples in soft and flexible materials.
Parts are cut straight from your drawing, so you can validate them on the assembly without paying for tooling first.
ToolingA cutting die per partCut straight from the drawing
ValidationTested after toolingFunctional samples first
RevisionsNew die for every changeEdit the file, cut again
Supply gapWaiting on the moldShort-run parts meanwhile
02 · Scope of work
Whatwecut
F-02
Industrialcomponents
Flexible parts for machinery and assemblies — pads, washers, spacers and seals — made to fit and to function.
F-03
Protectiveinserts
Soft inserts, liners and pads that cushion, separate and protect parts in handling and in use.
F-04
Functionalsamples
Parts you can actually fit, compress and test on the assembly, not just look at.
F-05
Short-runproduction
Small production batches cut to the same file, for pilot builds, spares or low-volume products.
F-06
Fastdesignrevisions
Change the drawing and re-cut the part, so each iteration costs a sample rather than a new die.
03 · What you gain
Faster,withoutthedie
01
Fastfunctionalvalidation
Test fit, seal and compression on real parts within days, before committing to any tooling.
Tested early02
Notoolingcosts
Parts are cut straight from your file, so prototypes and changes don't carry the cost of a cutting die.
Die-free03
Bridgeproductionwhilemoldsaremade
Short-run parts keep assembly lines and pilot builds moving while production molds are still being made.
Line kept moving04
Iteratewithoutpenalty
Revise the design as often as testing demands — every change is just a new cut.
Unlimited revs04 · Who it's for
Builtforengineers
IndustrialOEMs
Manufacturers who need gaskets, seals and flexible parts validated or supplied before full production.
Automotivesuppliers
Suppliers prototyping seals, pads and protective parts, or covering a short run while molds are made.
Productengineers
Engineers who need a functional soft part in hand to test a design, fast and without tooling.
Draw · Cut · Test
Discussyour
component.
Send us the drawing, the material and what the part has to do — seal, cushion or protect — and we'll cut a functional prototype, or a short run to keep production moving.
Component ticket · What's inside
Drawing & material reviewIncluded
Functional prototypeIncluded
Fit & compression checkIncluded
Revision roundsIncluded
Short-run productionOn request
No tooling